Polypropylene Mat

Resin Flow Mat

  • long glass fiber reinforced polypropylene
  • polypropylene fiber manufacturers

Brief

Polypropylene mat is made up of polypropylene fiber needles punched together.
Polypropylene mat used in unsaturated polyester, epoxy resin system.

CHARACTERITICS

Applications require higher bending stiffness and strength without adding weight.

  • Used in unsaturated polyester, epoxy resin system.

  • Applies in hatches, small boat hulls, pressure vessels.

  • Afford resin fast flow through infusion vacuum, RTM, LRTM process.

COMPONENTS

  • B=120 g/m2

  • C=180 g/m2

  • D=250 g/m2

ADVANTAGES

  • Rapid wet-through.

  • Without chemical binders.

  • Good covering and degassing properties.

  • Compatibility with a different type of resins.

  • Conformable to complex, double-curved shapes.

  • Provides a wide thickness range to avoid tight or loose areas.

  • Provides a very good resin flow, saving the whole process time.

  • The high degree of deformability to be adapted to different mold cavities.

PP STANDARD

  • With equality performance, no stain, print.

  • No hole, agglomeration, stain in whole rolls.

  • Tolerance of weight per square meter: ±10%.

  • Width: 50-2600mm.

  • Tolerance: ±2.5%.

  • No. of Denior: 75D.

  • Length of average: 70-90mm.

  • Weight per unit area: 180,250 g/m2.

  • Type of technical : nonwoven needle punched.

  • Other designs are available for customer’s needs.

SPECIFICATIONS

SPECIFICATION Polypropylene Weight (g/m2) Width(mm) Manufacturing Process
PP120-1250mm 120 1250 Adhesive bonding
PP180-1250mm 180 1250 Adhesive bonding
PP250-1250mm 250 1250 Adhesive bonding

CONTACT

Dymriton Composites offers many types of Resin Flow Mat specially designed with user needs for FRP products.
FREE SAMPLE is available, Contact us now!

ANY QUESTIONS OR COMMENTS, PLEASE GET A HOLD OF US IN WHICHEVER WAY IS MOST CONVENIENT. WE WILL REPLY YOU WITHIN 24 HOURS.