Say Goodbye to Fiber Print, Polyester Surfacing Veil Enhance Surface Quality for FRP Panels
Polyester Surfacing Veil – Needle-Punched Process
Polyester Surfacing Veil is Dymriton range of surfacing veils for the FRP industry. Formed by needle-punched process, without binder, used in a close mold like RTM, RTM light, Infusion Vacuum.
“It is used to prevent fiber print, improve surface quality in the broadest sense of the word according to provides a brightness & smoothness surface finished.”
Polyester Surfacing Veil is without chemical bond, nonwoven polyester surfacing tissue by the needle-punched process. It creates a smooth, resin-rich layer. This layer serves as a chemical barrier & creates a smooth surface finish. This means that the material becomes softer when it is wetted. Makes it easier to shape into curved products.
Polyester Surfacing Veil is without any chemical binder & Used in close mold processes: RTM, Infusion Vacuum.
Polyester Surfacing Veil includes two types of weight:
20g/m2.
40g/m2.
60g/m2.
80g/m2.
100g/m2.
The standard width of a Polyester Surfacing Veil is 1 m. Within 2.6 meters other Wider widths are available.
ANY QUESTIONS OR COMMENTS, PLEASE GET A HOLD OF US IN WHICHEVER WAY IS MOST CONVENIENT. WE WILL REPLY YOU WITHIN 24 HOURS.
