“Flow Mat is available in combination with other materials as a product. The layer of reinforcements can be freely adapted and comprise optionally of one or two chopped strand layers. And, the flow layer is selectable by PP or other material: CFM, Mesh, Multiaxial.”

Flow Mat is a combination max product, which means that the sandwich complex is additionally reinforced with multiaxial interlaid complexes. And both side chopped strand fiber layer type is selectable freely.

Flow Mat combination max product not only applies time savings in terms of the resin flow speed but makes mold filling time reduced in wide margin again.

A needle punched non-woven surface felt material can be laid on the surface of flow mat:

Polyester surfacing veil covers fiber print pave directly on mold cavity or together with Gelcoat. On the best, Dymriton can also produce customer-specific material in our special technology.

Perfect drapability.

Flow Mat is easily deformed in complex mold shapes, also applies good surface finish properties through a perfect flow layer. The better optimum choice for close mold processes such as RTM, RTM light, infusion, etc.

The resin flow rapid.

The flow layer has a 25 % faster flow rate compared with the mat without a flow layer. The High-Flow version saves time during large parts when the time for resin transfer is limited.

FRP close mold mat Flow Mat: Dymriton closed injection processes mat.